tip and ring common mode filters document 257-1 specifications subject to change without notice. document 257-1 revised 9/20/01 these high performance, high current tip and ring filters are designed to help telecom equipment engineers meet fcc and ccitt requirements. they provide at least 35 db attenuation of common mode noise over a broad frequency range, while the low differential mode attenuation provides excellent signal integrity. the filters come in 2- and 1-line versions and provide 1500 vrms isolation between pairs. for free evaluation samples, contact coilcraft or visit www.coilcraft.com. patent pending rated dcr dielectric part inductance current max strength 1 number lines min (h) (a) (ohms) min (vrms) trc4200 2 20 2.00 .055 1500 trc4100 2 70 1.20 .150 1500 trc4010 2 140 0.50 .225 1500 trc2200 1 20 2.00 .055 1500 trc2100 1 70 1.20 .150 1500 TRC2010 1 140 0.50 .225 1500 1 2 line parts: 1,2-3,4 1 line parts: 1-4 2 operating temperature range -40 c to +125 c 3 electrical specifications at 25 c
document 257-2 specifications subject to change without notice. document 257-2 revised 9/20/01 typical response - trc4200 typical impedance - trc4200 typical response - trc4100 typical impedance - trc4100 typical response - trc4010 typical impedance - trc4010 tip and ring common mode filters *measured on agilent/hp8753es analyzer
|